QUICSEAL 510 Grout

QUICSEAL 510 Non-Shrink Grout

Product Description:

QUICSEAL 510 Grout is a ready-to-use cementitious non-shrink grout designed for various applications. It is non-metallic, chloride-free, and requires the addition of water to produce a free-flowing non-shrink grout.

Advantages:

• Economical and easy to use as a premixed cementitious grout.
• Non-corrosive, ensuring no corrosion to rebar, staining, or deterioration due to rust expansion.
• Chloride-free composition allows high early strength development without the use of chlorides.

Uses: QUICSEAL 510 can be used in plastic or flowable consistency states in various applications such as:

• Bedding bearing plates.
• Precast applications, including bedding precast units like walls, slabs, refuse chutes, and filling precast joints and gaps.
• Small patch repairs.

Application:

Surface Preparation:

• Ensure surfaces are clean, sound, and free from laitance, oil, and grease.
• Remove defective concrete until sound concrete is reached.
• Saw cut repair locations and break out the complete repair area to a minimum depth of 10 mm.
• Remove loose scale and corrosion deposits from corroded steel.

Mixing:

• Add the specified amount of water to a clean container.
• Slowly add QUICSEAL 510 powder and mix with a slow-speed drill until a homogeneous and lump-free consistency is obtained.

Placing:

• For horizontal application, apply well-mixed QUICSEAL 510 to the prepared surface at a thickness of 10mm to 40mm in one layer.
• For vertical applications, adjust the water-to-dry mix ratio for a drier consistency.
• Scratch-key intermediate layers before applying subsequent layers.

Curing:

• Allow QUICSEAL 510 to cure naturally in ambient conditions.
• Protect against rapid drying due to wind, direct sunlight, or high temperature by covering with polythene sheet, wet hessian, or QUICSEAL 507 Cure-Shield WB curing compound.

Technical Data:

• Compressive Strength: > 55 N/mm² (ASTM C942: 1999)
• Shrinkage: 0% (ASTM C940: 1998a)
• Setting Time: Initial setting > 1 hr, Final setting < 10 hrs (ASTM C953: 1987)

Packaging: QUICSEAL 510 is supplied in 25kg bags.

Storage: Store in a sheltered, cool, dry place, protected from rain, sunlight, and extreme temperatures. Shelf life is 12 months when stored as instructed in its original packaging.

Coverage / Yield:

• Flowable consistency: 4.3 – 4.5 litres of water, yielding 13.5 litres per bag.
• Semi-Precast (Trowellable) consistency: 3.3 – 3.5 litres of water, yielding 12.0 litres per bag.

Health & Safety: QUICSEAL 510 is not hazardous but is alkaline. Wear protective clothing, filter mask, and gloves during handling.