QUICSEAL 102ECO

QUICSEAL 102ECO – Purflex

Product Name: Purflex

Description: QUICSEAL 102ECO is a single-component, ready-to-use polyurethane liquid-applied waterproof membrane. It consists of a special blend of copolymers and additives to provide an excellent seamless, elastomeric, and quick-drying waterproofing membrane.

Uses:

• Kitchens, toilets, balconies, lift pits, etc.
• Waterproofing on dry walls in wet areas (e.g., gypsum and cement board)
• Walkways, terraces, planter boxes
• Precast gable end walls
• RC flat and roof terrace in built-up roofing systems (concealed applications)

Advantages:

• Single component – ready to use
• Applicable by brush, roller, or spray
• Quick-drying
• Elastomeric seamless membrane
• Able to bridge cracks
• Paintable with good quality acrylic paint
• Water-based formulation – Environmentally friendly

Technical Data:

• Product Type: Polyurethane high solids prepolymer (water-based)
• Colour: Grey
• Density: 1.10 + 0.06 g/ml
• Recoat Time: 4 – 6 hours
• Hardness (Shore A): > 40
• Tensile Strength: > 2.0 N/mm²
• Percentage Elongation: > 500%
• Water Vapour Transmission: < 30 g/m² /24 hrs
• Adhesion to Concrete: > 1.2 N/mm²
• Hydrostatic Pressure Resistance: No water penetration @ 0.2 bar
• Crack Bridging: No cracks @ 2mm (10 cycles)
• Application Temperature: 5 – 35 °C
• Tack Free Time: 4 – 6 hours
• Light Pedestrian Traffic: > 24 hours
• Chemical Properties: Good resistance against acidic and basic solutions (0.5%), detergents, seawater, and oils.

Surface Preparation:

• Substrates must be clean, sound, and free of dust and loose particles.
• Remove laitance, oil, grease, mould release agents, or any foreign contaminants.
• Form a cement and sand fillet at all corners to receive the waterproofing membrane.

Application:

• Stir QUICSEAL 102ECO manually before application.
• For horizontal and vertical surfaces, use a roller, brush, or spray gun.
• Ensure no air is entrapped in the membrane.
• Pre-treat corners, upturns, and pipe penetrations with a brush.
• Allow the membrane to dry for 4-6 hours before the second coat.
• Cure the second coat for 24 hours before conducting a flooding test.

Packing & Coverage:

• Pack Size: 24 kg pail
• Coverage: 1.3-1.5kg/m² /2 coats
• Wet Film Thickness/Coat: 1.2 ± 0.1mm

Cleaning:

• Due to high adhesion strength, wash tools with water before the product sets.
• After setting, cleaning can only be achieved by mechanical means.

Storage:

• Shelf life is 12 months when stored unopened in a cool and dry place.