Sika Reemat Premium-120

Sika Reemat Premium-120 | Glass Fiber Mat (gfm) Reinforcement System

Description:

Sika Reemat Premium-120 is a reinforcement material designed for use with liquid-applied waterproofing membranes. The randomly oriented fibers within the mats provide maximum multi-directional tensile strength to the membranes while retaining high elasticity.

Uses:

• Waterproofing reinforcement on flat roofs, balconies, terraces, etc.
• Ideal for roofs with many details and complex geometry.
• Suitable for both total and partial waterproofing reinforcement.
• Applicable in general detailing works and other waterproofing projects in new construction and refurbishment.
• Effective for repairing old waterproofing membranes.

Characteristics/Advantages

• Tested for use with Sikalastic® systems liquid-applied waterproofing membranes.
• Quick application and easily molded around various surface details.
• Increases tensile strength and ensures the correct thickness of the waterproofing layer.
• Facilitates crack bridging properties of the waterproofing layer.
• Adapts to different shapes and profiles on the substrate surface.

Product Information

• Composition: Random glass fiber matting
• Packaging: Roll
• Appearance/Colour: White
• Shelf Life: 24 months
• Storage Conditions: Properly stored in original, unopened, undamaged sealed packaging in dry conditions, flat, and wrinkle-free.
• Length: ~200 m
• Width: 1.38 m

Application Instructions

Substrate Preparation:

• Refer to the Product Data Sheet of the coating system/material used.

Application:

1. Apply a sufficient quantity of the coating material onto the substrate to thoroughly wet Sika® Reemat Premium-120.
2. Roll in Sika® Reemat Premium-120 to eliminate bubbles or creases.
3. Apply subsequent layers of coating to achieve the required total film thickness.
4. Overlap Sika® Reemat Premium-120 by at least 50 mm on all sides.
5. For borders with other waterproofing membranes, overlap by a minimum of 100 mm.

Detail Work/Embedment:

• Pre-cut required lengths of Sika® Reemat Premium-120.
• Apply sufficient coating material to the area to be reinforced.
• Lay pre-cut lengths onto the wet coating, ensuring embedding.
• Apply subsequent layers of coating to the required total film thickness.

Large Area/Embedment:

• Apply sufficient coating material onto the substrate in sections.
• Lay Sika® Reemat Premium-120 onto the wet coating, ensuring embedding.
• Apply subsequent layers of coating to achieve the required total film thickness.

Basis of Product Data

• Technical data is based on laboratory tests, and actual measured data may vary due to uncontrollable circumstances.

Legal and Safety

• Users must refer to the most recent Safety Data Sheet (SDS) for information on handling, storage, and disposal.
• The information provided is based on Sika’s current knowledge and experience.
• Users must test the product’s suitability for the intended application, and Sika reserves the right to change product properties.
• Local restrictions and regulations may apply, and users should refer to the local Product Data Sheet for accurate information.

Please note that this is a summarized version, and for detailed application and safety information, the full Product Data Sheet should be consulted.