Dr. Fixit Roofkote No.1

DR. FIXIT ROOFKOTE NO.1 – A GENERAL PURPOSE WATERPROOFING BITUMEN EMULSION

Description

Dr. Fixit Roofkote No.1 is a game-changing waterproofing solution designed for tackling stubborn leaks and damp issues. This viscous dark brown smooth cream is a water-borne bitumen emulsion, fortified with bitumen chemicals and mineral fillers. It boasts a perfect consistency for application in thick films, either by brush or mop, and it forms a steadfast bond with dry or damp surfaces.

Application

Dr. Fixit Roofkote No.1 proves its versatility in various applications:

• Waterproofing for Roof, Wall, and Gutters: This superlative solution works wonders on various surfaces, be it concrete, metal, tile, wood, plastic, and more.
• Rot Prevention for Wood and Timber: It acts as a savior for wood and timber, preventing rot and extending their life.
• Rust Protection for Galvanized Roof and Metal: Dr. Fixit Roofkote No.1 acts as a guardian, safeguarding galvanized roofs, metal structures, pipes, and even vehicle underbodies from rust.
• Corrosion Protection for Concrete: When faced with the corrosive effects of seawater, this product comes to the rescue, preserving the integrity of concrete structures.
• Sound Deadening for Metal Roofs: Apply it to metal or galvanized roofs to dampen sound effectively.

Advantages

Dr. Fixit Roofkote No.1 offers several advantages:

• Weatherproof Membrane: When applied with reinforcement polyester, it forms a seamless, weatherproof membrane without the need for jointing or overlapping.
• Comprehensive Waterproofing: Achieve complete continuity and integration across the entire roof, leaving no room for leaks.
• Versatile Application: The product can be applied by brush, mop, or even reinforced for extra durability.
• Environmental Friendliness: The waterborne formula is environmentally friendly and safe for use.

Product Information

Explore the key technical details of Dr. Fixit Roofkote No.1 in the table below:

Property	Standard/Method	Result
Appearance	ASTM D 1227-87 Type III	Dark brown smooth cream
Specific Gravity	1	–
Flash Point (°C)	None	–
Residue by Evaporation (%)	55-60	–
Service Temperature (°C)	-15 to 80	–
Chemical Resistance	Resistant to alcohol, salt solutions; not resistant to oil	–
Heat Flow Resistance	Cured film won’t flow or sag	–
Flexibility	Flexible coating	–
Shrinkage Factor	ASTM D 1227-87 Type III	45% wet to dry state
Water Vapor Transmission	0.075 perms at 1.5mm thickness (38°C and 90% Relative Humidity)	–
Drying Time	3-6 hours	–
Crack Bridging	ASTM C1305-08	> 2 mm
Thickness Recommendation	At least 0.7 mm; At most 1 mm	–

Construction Instructions

To ensure the successful application of Dr. Fixit Roofkote No.1 for waterproofing and protection, follow these step-by-step construction instructions:

Step 1: Surface Preparation

Before applying Dr. Fixit Roofkote No.1, it’s crucial to prepare the surface properly. This step ensures optimal adhesion and the longevity of the waterproofing solution. Here’s what you need to do:

• 1.1 Clean the Surface: Remove all dirt, dust, loose material, and contaminants from the surface. Use a stiff brush or pressure washer if necessary.
• 1.2 Priming: To create a strong bond between the surface and Dr. Fixit Roofkote No.1, prime the surface with a diluted solution of Dr. Fixit Roofkote No.1 and water in a 1:1 ratio. Apply the primer evenly using a brush or roller. Allow it to dry completely.

Step 2: Application of Dr. Fixit Roofkote No.1

Now that the surface is prepped, it’s time to apply Dr. Fixit Roofkote No.1. Follow these instructions for a successful application:

• 2.1 First Coat: Apply the first coat of Dr. Fixit Roofkote No.1 using a brush or mop. Ensure that the coat is evenly spread across the surface. Allow this coat to dry thoroughly before proceeding to the next step.
• 2.2 Subsequent Coats: Depending on the required waterproofing thickness, you can apply multiple coats. Each coat should be applied at right angles to the previous one. This crisscross pattern ensures a uniform and consistent waterproofing membrane. Allow each coat to dry before adding the next layer.
• 2.3 Reinforcement with Polyester: For maximum durability and flexibility, consider reinforcing the final coat with polyester. Lay polyester mesh or fabric over the wet coat and ensure it’s completely embedded. Apply an additional coat over the reinforcement to secure it in place.

Step 3: Cautions and Considerations

To achieve the best results with Dr. Fixit Roofkote No.1, be mindful of the following cautions and considerations:

• 3.1 Avoid High Temperatures: Do not apply the product on hot concrete surfaces or on days with strong winds. Rapid drying may hinder proper adhesion and result in blistering.
• 3.2 Protection from Sunlight: After the final application of Dr. Fixit Roofkote No.1, protect it from direct sunlight. This can be accomplished by painting over it, using protection boards, or backfilling.

Step 4: Final Precautions and Considerations

Ensure that you take necessary precautions for a safe and effective application:

• 4.1 Dry and Temperature Conditions: Apply Dr. Fixit Roofkote No.1 when the substrate is dry and under ambient temperatures ranging from 5 to 35°C.
• 4.2 Check Humidity and Dew Point: Verify humidity and dew point conditions. The surface temperature should be at least 5°C above the dew point to prevent the formation of water droplets on the surface.
• 4.3 Avoid Direct Heat: Never directly heat Dr. Fixit Roofkote No.1 containers with a flame, stove, hot plate, or oven. Use an airless spray for a higher application rate.
• 4.4 Surface Irregularities: Fill voids and deep depressions in the surface with appropriate patching material before applying Dr. Fixit Roofkote No.1. Ensure a smooth and even substrate.
• 4.5 Dam Drains: Before applying Dr. Fixit Roofkote No.1, dam all drains and drain openings to prevent material from entering and clogging them.

Step 5: Final Notes

• Remember that Dr. Fixit Roofkote No.1 should never be left without a top coating, and it should be protected from direct sunlight or mechanical damage. Do not expose the surface to traffic before applying a top coat.

By following these detailed construction instructions, you’ll maximize the effectiveness of Dr. Fixit Roofkote No.1, ensuring long-lasting, water-tight results for your waterproofing and protection needs.